Click image to view full size image
High Molecular Polymer Nonionic Softener Flakes Leveling Agent WEL
SOULBIO WEL (Dyeing and softening in one bath Softener)
Chemical Composition
High molecular polymer
Technical Specification
Appearance: pale yellow flakes
PH value: 4.5~6.5 (510% solution)
Ionicity: nonionic
Dissolving Method
Temperature raising : Add the flakes in water(room temperature )gradually in the proportion of 5-10%, stir them and heat up to ( 65~75 ) and stir them for 30-60 mins again until the flakes
become even paste, then cool it down.
High temperature :Add the flakes in water ( 65~75) gradually in the proportion of 5-10%,
stir them for 30-60 mins again until the flakes become even paste, then cool it down.
Properties
Impart very soft, Smooth and full handle to fabric
Good salt resistance , alkali resistance and low yellowing, high hydrophilic property in polyester
Can be used in dyeing process and prevent crease defect because of knotted fabric in dyeing
As a leveling agent, can be used in disperse dyes, reactive dyes (light colour ), acid dyes (light colour )dyeing process with leveling , retarding dyeing and migration dyeing properties ,no dull effect and no influence on fabric’s colour shade and colour yied
Field of Application
For all kinds of fibres and fabrics, also as a softener, leveling agent in dyeing process
Application
Padding: Dosage: 2030g/L (10% solution) Temperature: 3040
Process: one dip and one pad or two dips and two pads
Dipping: Dosage: 38%(o.w.f) (10% solution) Liquor ratio: 1:1015
Temperature: 4050 Time: 30min
